Peak Peak 50/50 Prediluted Antifreeze + Coolant

Ingredients

Water (7732-18-5), Ethylene Glycol (107-21-1), Diethylene Glycol (111-46-6), Potassium 2-Ethylhexanoate (3164-85-0), Sodium 2-Ethylghexanoate (19766-89-3), Denatonium Benzoate (3734-33-6).

Warnings

Warning: This product can expose you to ethylene glycol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Warning: Harmful or fatal if swallowed. Read other cautionary information or back panel. Caution: Do not remove pressure cap when engine is hot. Do not add water. When Disposing of Used Antifreeze/Coolant: Follow local laws and regulations. If required, dispose at facilities licensed to accept household hazardous waste. Do not discard into storm sewers, septic systems, or onto the ground. Warning: Harmful or fatal if swallowed. Contains ethylene glycol. Do not drink antifreeze or solution. If swallowed, do not induce vomiting. Immediately contact a Poison Control Center or hospital emergency department. Avoid inhaling mist or hot vapors. If inhaled, remove to fresh air. Ethylene glycol causes birth defects in laboratory animals. Do not let stand or store in open or unlabeled containers. Do not reuse container. Wash thoroughly after handling. Solution can be poisonous to animals. Keep out of reach of children.

Details

All vehicles. 50/50 prediluted. Antifreeze + Coolant. Gas/Diesel; Electric; Hybrid. 10+ years 300,000 miles. Year-round engine protection. Ready to use. Peak All Vehicles Antifreeze + Coolant is formulated to protect all cooling system metals, including aluminum. It immediately protects against damaging rust and corrosion and is free of phosphates. borates, nitrites, silicates and amines. For Use in All Vehicles: Cars; SUVs; Light Duty Trucks. Compatible with: All makes / All models. All coolant colors. All coolant technologies. Go to peakauto.com/diy-hub or scan code for complete instructions and how to videos for performing cooling system maintenance. Scan me. Follow Peakauto on social: Facebook. Twitter. YouTube. Instagram, TikTok. 800-283-7234.

Directions

How to Use: Before installing Peak Antifreeze + Coolant, the system should be clean, leak-tight, and in proper working order. Protection Chart(a): Freeze Protection; -34 degrees F (-36 degrees C). Boilover Protection(b); 265 degrees F (129 degrees C). Corrosion Protection; Protects All Cooling System Metals Meets ASTM D3306 & D4985. (b)Using a 15 psig (103 kPa) pressure cap. (a)For optimum performance and corrosion protection, coolant concentration should be maintained at 50% by volume. To open press tab with thumb while unscrewing. Reclose tightly.

Country of Origin

Made In The USA Of Domestic And Foreign Content.,USA

Manufacturer

Old World Industries, LLC.

Product Disclaimer:

Stop & Shop is committed to providing accurate nutritional information to its customers. As an important part of that effort we voluntarily provide such material on our website. We rely upon our suppliers to provide us with this information on an ongoing basis and to advise us immediately whenever any new claims or adjustments to declared values are made, so that we can properly maintain the accuracy of this online resource. We have, however, experienced occasional situations in the past where, due to the lack of such notice or for some other reason, minor discrepancies in this area have occurred. We therefore strongly encourage our customers to read the labels of any of the products that they purchase in order to make certain that they are compatible with their own nutritional preferences and expectations. If you receive a product from Stop & Shop, and the nutritional information on the product label does not match the information on our site, please contact Stop & Shop customer service and we will arrange for a credit to issue for the product at issue.